Direct wire drawing machine of the company

In this direct wire drawing machine, 8 drums are equipped with ALPHA-6000S series frequency converters of 30kW, and the winding is equipped with ALPHA-6000S series frequency converters of 18.5kW. The motor adopts a 6-pole variable frequency motor and is equipped with a 1024 wire encoder. Stretch 8mm copper material through 9 molds to 3mm finished product and roll it up for backup. The working speed of the wire drawing machine is infinitely adjustable between 0-670m/min, and the maximum output can reach 2.5T.

The operating platform of the machine is simple and clear. The entire operating panel has only three buttons, namely start, stop and emergency stop, and a speed regulating Potentiometer. The wiring of the control part is also simple and convenient. The touch screen, PLC, and 9 frequency converters are all connected through communication, and internal logic is used for threading and wire drawing interlocking; Changing the variable frequency torque parameters through an external touch screen; Real time display of parameters such as wire drawing length and wire drawing machine manufacturer's weight; Add S7-200 PLC for start stop control, brake control, speed measurement, length measurement, weight calculation, etc; There is no need to install tension sensors or swing arm methods, and the mechanical design and manufacturing are simple and convenient.