Purchasing reference factors and vibration prevention measures for Hangzhou pulley wire drawing machine equipment!

Purchasing reference factors and vibration prevention measures for Hangzhou pulley wire drawing machine equipment! Hangzhou pulley wire drawing machine equipment is becoming increasingly important in industrial production, so there are more and more manufacturers producing stainless steel Hangzhou pulley wire drawing machines and automatic wire drawing machines. It is inevitable that some products with inadequate technology and unqualified quality will appear. Many consumers are not very familiar with Hangzhou pulley wire drawing machines, so they may purchase counterfeit goods, causing economic losses.

When purchasing Hangzhou pulley wire drawing machine equipment, one should consider their own production scale. If the output is not very large, or if the output is large but there are many types and the same product quantity is small, it will be more cost-effective to directly use manual wire drawing. If it is not possible to recruit corresponding maintenance and fixture production personnel, careful consideration should be given. Do not rush to install the Hangzhou pulley wire drawing machine.

Is the surface treatment process of one's own product clear, as it involves wiring requirements and process arrangements are more important. In addition, when purchasing a Hangzhou pulley wire drawing machine, it is necessary to conduct wire drawing tests on the samples, as the wire drawing effect of sand belts with different mesh numbers also varies. Those who have not used the Hangzhou pulley wire drawing machine naturally feel uneasy about its effectiveness.

The Hangzhou pulley type wire drawing machine equipment in the factory's wire drawing workshop has a high level of noise during operation, which has a serious impact on the physical health of workers in the wire drawing workshop. It is an urgent problem to be solved in the current clean production of the enterprise. Hangzhou pulley wire drawing machine is the main source of Noise pollution. The meshing noise during gear operation is a significant source of noise in the Hangzhou pulley wire drawing machine. Wear of the gear meshing surface or excessive assembly backlash of the gear can cause significant meshing noise during transmission.

Adjust the clearance between the gear pairs of the Hangzhou pulley wire drawing machine to a suitable distance, and fully lubricate each pair of gear pairs; The looseness of the casing cover can also generate noise. In the entire process from the wire drawing of the Hangzhou pulley wire drawing machine to the take-up device, it is difficult to avoid noise φ Use polytetrafluoroethylene sheets as pads for areas where significant noise occurs due to the collision of 3 copper wires, in order to achieve the goal of reducing wear and noise on the Hangzhou pulley wire drawing machine.