CN/EN

Sales & Service

The company was founded in 1975 and has been in existence for 40 years.

Home >> Product Show >>Pulley type wire drawing machine >> LWX-6-550 Pulley Wire Drawing Machine with High Speed and Low Noise
详细说明

LWX-6-550 Pulley Wire Drawing Machine with High Speed and Low Noise

收藏
  • Trade description

The pulley type wire drawing machine developed by Hangzhou Wire Drawing Machine Manufacturing Factory not only operates stably and reliably with low energy consumption, but also greatly improves production efficiency. It is suitable for drawing spring steel wire, bead steel wire, rope steel wire, fiber optic steel wire, CO2 gas shielded welding wire, flux cored welding wire, alloy steel wire, stainless steel wire, aluminum clad steel wire, and low relaxation prestressed steel wire.

Equipment characteristics:

Low noise: The main transmission adopts a hard tooth reduction gearbox, effectively reducing transmission noise. It is filled with oil before leaving the factory. Efficiency: reduces the occurrence of faults, has a high average working speed, and greatly improves production efficiency. Equipped with drum water cooling and mold water cooling

Appearance: The equipment is structurally optimized based on a flat machine design, which conforms to international trends and can be comparable to imported equipment.

Main technical parameters:

(1) Drawing material: low-carbon steel Q195, Q235

(2) Input wire diameter: Φ 6.5mm; Outlet wire diameter: Φ 2.5mm

(3) Minimum wire diameter: Φ 2.5mm

(4) Maximum incoming strength: 750Mpa

(5) Drawing pass: 8 Drum diameter: 550mm

(7) Pulling speed: 300m/min (depends on many factors, like quality of wire rod, die, etc.)

(8) Speed regulation method: variable frequency speed regulation

(9) Motor power: 18.5KW

For example, with a finished product specification of 2.5mm and a speed of 350 meters per minute, the output per hour is approximately 900KG.


×
seo seo